HPE FlexNetwork MSR3044

382
Examples
# Disable kernel thread starvation detection for kernel thread 15.
<Sysname> system-view
[Sysname] monitor kernel starvation exclude-thread 15
Related commands
display kernel starvation
display kernel starvation configuration
monitor kernel starvation time
monitor kernel starvation enable
monitor kernel starvation time
Use monitor kernel starvation time to set the interval for identifying a kernel thread starvation.
Use undo monitor kernel starvation time to restore the default.
Syntax
Centralized devices in standalone mode:
monitor kernel starvation time time
undo monitor kernel starvation time
Distributed devices in standalone mode/centralized devices in IRF mode:
monitor kernel starvation time time [ slot slot-number [ cpu cpu-number ] ]
undo monitor kernel starvation time [ slot slot-number [ cpu cpu-number ] ]
Distributed devices in IRF mode:
monitor kernel starvation time time [ chassis chassis-number slot slot-number [ cpu
cpu-number ] ]
undo monitor kernel starvation time [ chassis chassis-number slot slot-number [ cpu
cpu-number ] ]
Default
The interval for identifying a kernel thread starvation is 120 seconds.
Views
System view
Predefined user roles
network-admin
Parameters
time time: Specifies the interval for identifying a kernel thread starvation, in the range of 1 to 65535
seconds.