380
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies an MPU by its slot number. If you do not specify this option, the active
MPU is specified. (Distributed devices in standalone mode.)
slot slot-number: Specifies an IRF member device by its ID. If you do not specify this option, the
master device is specified. (Centralized devices in IRF mode.)
chassis chassis-number slot slot-number: Specifies an MPU on an IRF member device. If you do
not specify this option, the global active MPU is specified. (Distributed devices in IRF mode.)
cpu cpu-number: Specifies a CPU by its number. (Centralized devices in IRF mode/distributed
devices in IRF or standalone mode.)
Usage guidelines
Starvation occurs when a thread is unable to access shared resources.
The command enables the system to detect and report thread starvation. If a thread is not executed
within an interval, the system considers that a starvation has occurred, and outputs a starvation
message.
Thread starvation does not impact system operation. A starved thread can automatically run when
certain conditions are met.
Inappropriate use of the command can cause service problems or system breakdown. Make sure
you understand the impact of the command on your network before you use it.
Examples
# Enable kernel thread starvation detection.
<Sysname> system-view
[Sysname] monitor kernel starvation enable
Related commands
display kernel starvation configuration
display kernel starvation
monitor kernel starvation time
monitor kernel starvation exclude-thread
monitor kernel starvation exclude-thread
Use monitor kernel starvation exclude-thread to disable kernel thread starvation detection for a
kernel thread.
Use undo monitor kernel starvation exclude-thread to enable kernel thread starvation detection
for a kernel thread.
To Next Page
Loading...
Need help?
General
