511
Examples
# Specify 1.2.1.2 as the source IP address for flow log packets.
<Sysname> system-view
[Sysname] userlog flow export source-ip 1.2.1.2
Related commands
userlog flow export host
userlog flow export timestamp localtime
Use userlog flow export timestamp localtime to configure the device to use the local time in the
timestamp of flow logs.
Use undo userlog flow export timestamp localtime to restore the default.
Syntax
userlog flow export timestamp localtime
undo userlog flow export timestamp localtime
Default
The device uses the UTC time in the timestamp of flow logs.
Views
System view
Predefined user roles
network-admin
Usage guidelines
The device uses either the local time or the UTC time in the timestamp of flow logs.
• UTC time—Standard Greenwich Mean Time
(GMT).
• Local time—Standard GMT plus or minus the time zone offset.
The time zone offset can be configured by using the clock timezone command. For more
information, see Fundamentals Command Reference.
Examples
# Configure the device to use the local time in the timestamp of flow logs.
<Sysname> system-view
[Sysname] userlog flow export timestamp localtime
userlog flow export version
Use userlog flow export version to set the flow log version.
Use undo userlog flow export version to restore the default.
To Next Page
Loading...
