HPE FlexNetwork MSR3044 User Manual

54
Views
DHCP operation view
ICMP echo operation view
UDP tracert operation view
Predefined user roles
network-admin
Parameters
interface-type interface-number: Specifies an interface by its type and number.
Usage guidelines
For successful operation, the specified output interface must be up.
If both the next-hop and out interface commands are configured for the ICMP echo operation, the
out interface command does not take effect.
Examples
# Specify GigabitEthernet 1/0/1 as the output interface for probe packets in the UDP tracert
operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-tracert
[Sysname-nqa-admin-test-udp-tracert] out interface gigabitethernet 1/0/1
password
Use password to specify a password.
Use undo password to restore the default.
Syntax
password { cipher | simple } string
undo password
Default
No password is specified.
Views
FTP operation view
HTTP operation view
Predefined user roles
network-admin
Parameters
cipher: Specifies a password in encrypted form.

HPE FlexNetwork MSR3044 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3044
Category	Network Router
Language	English