344
slot slot-number: Specifies an IRF member device by its ID. If you do not specify this option, the
command displays the core file directory on the IRF master device. (Centralized devices in IRF
mode.)
chassis chassis-number slot slot-number: Specifies an MPU on an IRF member device. If you do
not specify this option, the command displays the core file directory on the global active MPU.
(Distributed devices in IRF mode.)
cpu cpu-number: Specifies a CPU by its number. (Centralized devices in IRF mode/distributed
devices in IRF or standalone mode.)
Examples
# Display the core file directory on the MPU. (Centralized devices in standalone mode.)
<Sysname> display exception filepath
The exception filepath is flash:.
# Display the core file directory on the active MPU. (Distributed devices in standalone
mode/centralized devices in IRF mode.)
<Sysname> display exception filepath
The exception filepath on slot 0 is flash:.
# Display the core file directory on the standby MPU. (Distributed devices in standalone
mode/centralized devices in IRF mode.)
<Sysname> display exception filepath slot 1
The exception filepath on slot 1 is NULL.
# Display the core file directory on the global active MPU. (Distributed devices in IRF mode.)
<Sysname> display exception filepath
The exception filepath on chassis 0 slot 1 is flash:.
display kernel deadloop
Use display kernel deadloop to display kernel thread deadloop information.
Syntax
Centralized devices in standalone mode:
display kernel deadloop show-number [ offset ] [ verbose ]
Distributed devices in standalone mode/centralized devices in IRF mode:
display kernel deadloop show-number [ offset ] [ verbose ] [ slot slot-number [ cpu cpu-number ] ]
Distributed devices in IRF mode:
display kernel deadloop show-number [ offset ] [ verbose ] [ chassis chassis-number slot
slot-number [ cpu cpu-number ] ]
Views
Any view
To Next Page
Loading...
Need help?
General
