227
Field Description
Community
SNMP community name for the RMON event. You can specify an SNMP
community name when you create an RMON event entry, but the setting does
not take effect. The system always uses the settings configured with the
SNMP feature when it sends RMON event notifications.
Take the action action
when triggered
Actions that the system takes when the event occurs:
• none—Takes no action.
• log—Logs the event.
• trap—Sends an SNMP notification.
• log-trap—Logs the event and sends an SNMP notification.
last triggered at
time uptime
Last time when the event occurred, which is represented as the amount of
time that elapsed since the system startup.
Related commands
rmon event
display rmon eventlog
Use display rmon eventlog to display information about event log entries.
Syntax
display rmon eventlog [ entry-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
entry-number: Specifies an event entry by its index in the range of 1 to 65535. If you do not specify
an entry, the command displays log entries for all event entries.
Usage guidelines
If the log action is specified for an event, the system adds a record in the event log table each time
the event occurs. Each record contains the log entry index, time when the event was logged (the
amount of time that elapsed since system startup), and event description.
The system can maintain a maximum of 10 records for an event. The most recent record replaces
the oldest record if the number of records reaches 10.
Examples
# Display the RMON log for event entry 99.
<Sysname> display rmon eventlog 99
EventEntry 99 owned by ww is VALID.
LogEntry 99.1 created at 50days 08h:54m:44s uptime.
To Next Page
Loading...
Need help?
General
