361
display process
Use display process to display process state information.
Syntax
Centralized devices in standalone mode:
display process [ all | job job-id | name process-name ]
Distributed devices in standalone mode/centralized devices in IRF mode:
display process [ all | job job-id | name process-name ] [ slot slot-number [ cpu cpu-number ] ]
Distributed devices in IRF mode:
display process [ all | job job-id | name process-name ] [ chassis chassis-number slot slot-number
[ cpu cpu-number ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
all: Specifies all processes. With the all keyword or without any parameters, the command displays
state information for all processes.
job job-id: Specifies a process by its job ID, in the range of 1 to 2147483647. Each process has a
fixed job ID.
name process-name: Specifies a process by its name, a case-insensitive string of 1 to 15 characters
that must not contain question marks or spaces.
slot slot-number: Specifies a card by its slot number. If you do not specify this option, the command
displays process state information for the active MPU. (Distributed devices in standalone mode.)
slot slot-number: Specifies an IRF member device by its ID. If you do not specify this option, the
command displays process state information for the master device. (Centralized devices in IRF
mode .)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. If you do not specify a card, this command displays
information for the global active MPU. (Distributed devices in IRF mode.)
cpu cpu-number: Specifies a CPU by its number. (Centralized devices in IRF mode/distributed
devices in IRF or standalone mode.)