HPE FlexNetwork MSR3044

512
Syntax
userlog flow export version version-number
undo userlog flow export version
Default
The flow log version is 1.0.
Views
System view
Predefined user roles
network-admin
Parameters
version-number: Specifies a flow log version. Available options are 1 and 3.
Usage guidelines
If you execute this command multiple times, the most recent configuration takes effect.
Examples
# Set the flow log version to 3.0.
<Sysname> system-view
[Sysname] userlog flow export version 3
Related commands
userlog flow export host
userlog flow syslog
Use userlog flow syslog to specify the information center as the destination for flow log export.
Use undo userlog flow syslog to restore the default.
Syntax
userlog flow syslog
undo userlog flow syslog
Default
Flow log entries are not exported.
Views
System view
Predefined user roles
network-admin