513
Usage guidelines
You can export flow log entries to log hosts or the information center, but not both. If both methods
are configured, the system exports flow log entries to the information center.
Flow log entries are converted to the syslog format when they are exported to the information center.
Their severity level is informational. With the information center, you can specify multiple log output
destinations, including the console, log host, and log file.
Log entries in ASCII format are human readable. However, the log data volume is higher in ASCII
format than in binary format.
Examples
# Specify the information center as the destination for flow log export.
<Sysname> system-view
[Sysname] userlog flow syslog
Related commands
userlog flow export host
To Next Page
Loading...
Need help?
General
