HPE FlexNetwork MSR3044 User Manual

256
Related commands
display snmp mib event
display snmp mib event trigger
Use display snmp mib event trigger to display information about a trigger and the trigger tests.
Syntax
display snmp mib event trigger [ owner trigger-owner name trigger-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
owner trigger-owner name trigger name: Specifies a trigger by its owner and name. The
trigger-owner argument must be an existing SNMPv3 user. The trigger-name argument is
case-sensitive string of 1 to 32 characters. If you do not specify a trigger, this command displays
information about all triggers and trigger tests.
Examples
# Display information about the trigger with the owner owner1 and the name triggerA and the trigger
tests.
<Sysname> display snmp mib event trigger owner owner1 name triggerA
Trigger entry triggerA owned by owner1:
TriggerComment : triggerA is to monitor the state of the interface
TriggerTest : existence | boolean | threshold
TriggerSampleType : absoluteValue
TriggerValueID : 1.3.6.1.2.1.2.2.1.7.3<ifAdminStatus.3>
TriggerValueIDWildcard : false
TriggerTargetTag : N/A
TriggerContextName : context1
TriggerContextNameWildcard : true
TriggerFrequency(in seconds): 600
TriggerObjOwner : owner1
TriggerObjName : obj1
TriggerEnabled : true
Existence entry:
ExiTest : present | absent
ExiStartUp : present | absent
ExiObjOwner : owner1
ExiObjName : object1
ExiEvtOwner : owner1
ExiEvtName : event1

HPE FlexNetwork MSR3044 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3044
Category	Network Router
Language	English