HPE FlexNetwork MSR3044 User Manual

514
Packet capture commands
The term "AP" in this document refers to MSR routers that support WLAN.
WLAN is supported only on the MSR954(JH297A/JH298A/JH299A).
display packet-capture status
Use display packet-capture status to display packet capture status information.
Syntax
display packet-capture status
Views
User view
Predefined user roles
network-admin
Examples
# Display packet capture status information.
<Sysname> display packet-capture status
Status : Capturing
File Name : flash:/a.pcap
User Name : N/A
Password : N/A
# Display packet capture status information for radio 1 of AP 1.
<Sysname> display packet-capture status
AP name : ap1
Radio ID : 1
Radio mode : 802.11n(2.4GHz)
Channel : 1
Status : Capturing
File name : database.dhcp
Username : 1
Password : ******
Table 97 Command output
Field Description
Status
Packet capture status. Only the
Capturing
status is supported in the current software
version.
Username Username for logging in to the remote FTP server.
Password
Password for logging in to the remote FTP server. Both passwords in encrypted form
and in plaintext form are displayed as
******
. If no password is required or configured,
this filed displays
N/A
.

HPE FlexNetwork MSR3044 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3044
Category	Network Router
Language	English