HPE FlexNetwork MSR3044 User Manual

188
username user-name: Displays information about the specified SNMPv3 user. The username is
case sensitive.
Usage guidelines
This command displays only SNMPv3 users that you have created by using the snmp-agent
usm-user v3 command. To display SNMPv1 or SNMPv2c users created by using the snmp-agent
usm-user { v1 | v2c } command, use the display snmp-agent community command.
Examples
# Display information about all SNMPv3 users.
<Sysname> display snmp-agent usm-user
Username: userv3
Group name: mygroupv3
Engine ID: 800063A203000FE240A1A6
Storage type: nonVolatile
User status: active
ACL: 2000
Username: userv3
Group name: mygroupv3
Engine ID: 8000259503000BB3100A508
Storage type: nonVolatile
User status: active
ACL name: testacl
Username: userv3code
Role name: groupv3code
network-operator
Engine ID: 800063A203000FE240A1A6
Storage type: nonVolatile
User status: active
Username: userv3code
Role name: snmprole
network-operator
Engine ID: 800063A280000002BB0001
Storage type: nonVolatile
User status: active
Table 41 Command output
Field Description
Username SNMP username.
Group name SNMP group name.
Role name SNMP user role name.
Engine ID Engine ID that the SNMP agent used when the SNMP user was created.

HPE FlexNetwork MSR3044 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3044
Category	Network Router
Language	English