Huawei NetCol5000-A025 - Startup

4.5.4 Startup
Context
Tap the Start or Shutdown buttons on the home screen to start or shut down the
smart cooling product.
● If a power failure occurs and the smart cooling product is powered on again,
the smart cooling product automatically restores to the original state (start or
shutdown) before the power failure.
● The hardware port for controlling the status of the remote dry contact or
On/O status on remote is reserved on the ACC. The status of the remote dry
contact and
On/O status on remote is on by default.
● The operations that start the smart cooling product successfully by the display
button or by element management system (EMS) is eective only when the
remote dry contact or
On/O status on remote is on the status of on.
Prerequisites
Download the Service Expert app from Huawei app store and runs on Android.
Apply for permission after downloading the app.
Step 1 Tap Start on the home screen of the ACC.
● If the screen shown in Figure 4-29 is displayed, tap Yes. Indicating initial
startup, perform Step 2 for initial startup
verication.
Figure 4-29 Initial startup
NetCol5000-A025 In-row Air Cooled Smart Cooling
Product
User Manual (300 mm Width) 4 Power-On Commissioning
Issue 15 (2020-12-10) Copyright © Huawei Technologies Co., Ltd. 154