Figure 3-39 Routing a humidier water inlet pipe from the top
3.10.3.2 (Optional) Connect the Water Inlet Pipe to the Wet Film Humidier
The humidier water inlet pipe is a hose installed under the humidier. When
connecting the hose, straighten the hose, as shown by Figure 3-40 and Figure
3-41.
After routing pipes, secure it with cable ties along the right side post of the
cabinet.
NetCol5000-A025 In-row Air Cooled Smart Cooling
Product
User Manual (300 mm Width) 3 Installation Guide
Issue 15 (2020-12-10) Copyright © Huawei Technologies Co., Ltd. 69