Table 2-2 Ports
No. Name Note
1 MUS05A Reserved
2 FE (fast
Ethernet)
communications port
3 CAN communications port for the main control board
and LCD
4 RS485_1 Reserved
5 USB Host ● After installing the WiFi module, locally
connect to the smart cooling product over the
Service Expert app. Obtain the initial startup
password during deployment. View or obtain
the running information about the smart
cooling product during preventive maintenance.
(Applicable to V200R001C20 and later
versions)
NOTE
Only Huawei service engineers or authorized service
engineers are allowed to use the WiFi module. To
ensure security, remove the WiFi module
immediately after use.
● Insert the USB
ash drive, import and export
the conguration le, export run logs, and
upgrade software.
6 RST restart switch for the display
7 SD Reserved
8 SW1-4 Dual in-line package (DIP) switch on LCD
2.3.2 Function and Features
Function
● Single unit control: Provides logic control for the components of a single
smart cooling product to ensure that the indoor temperature and humidity
meet requirements.
● Display operation: Provides a 7-inch touchscreen for you to set parameters for
the smart cooling product and query its status.
● Teamwork control: Enables multiple smart cooling products to work
cooperatively, distributes thermal loads in an optimal way to dramatically
reduce power consumption, and provides multiple standby smart cooling
products to improve the reliability.
● The smart cooling product has the following four remote functions.
NetCol5000-A025 In-row Air Cooled Smart Cooling
Product
User Manual (300 mm Width) 2 Product Description
Issue 15 (2020-12-10) Copyright © Huawei Technologies Co., Ltd. 17
To Next Page
Loading...
