Huawei NetCol5000-A025 - (Optional) Replacing a Wet Film Humidifier

Step 8 After checking that the smart cooling product does not leak, vacuumize the smart
cooling product and charge refrigerant.
----End
6.5.8 (Optional) Replacing a Wet Film
Humidier
Prerequisites
● The humidier needs to be replaced.
● A spare humidier of the same model is available and functional.
● Tools:
at-head screwdriver and water bucket
Context
The
humidier can be maintained only from the rear.
Procedure
Step 1 Tap Shutdown on the LCD home screen and turn o the smart cooling product
switch and QF4 in the PDC.
NO TICE
Exercise caution because the device is still energized after it is shut down on the
LCD.
Step 2 Open the rear door and remove the air lter.
Step 3 Cut o the ties on the water inlet pipe for the humidier.
NetCol5000-A025 In-row Air Cooled Smart Cooling
Product
User Manual (300 mm Width) 6 System Operation and Maintenance
Issue 15 (2020-12-10) Copyright © Huawei Technologies Co., Ltd. 244