Huawei NetCol5000-A025 - Page 39

Appearance, Specications, and Name
Pipe bending tool N/A N/A N/A
N/A N/A N/A
a: For equipment with electrode humidiers, ensure that the water pipe thread
sealant is able to resist temperatures higher than 85°C and the following
requirements are met.
● It applies to all pipe materials.
● PTFE as ller the anaerobic metal pipe thread sealant.
● The maximum seal gap is less than 0.5 mm.
● The maximum tolerated pressure is greater than 3 MPa.
● Conforms to JB∕T7311-2008
engineering mechanical the anaerobic adhesive
application technology
specication .
Table 3-4 Electrical installation tools
Appearance,
Specications, and Name
ESD gloves Insulation gloves Wire stripper Polyvinyl chloride
(PVC) insulation
tape
Heat gun Crimping tool N/A N/A
N/A N/A
Table 3-5 Commissioning tools
Appearance,
Specications, and Name
Pressure gauge (2
PCS)
a
Leather hose (5
PCS)
a
Vacuum pump
b
Thermocouple
temperature
sensor
NetCol5000-A025 In-row Air Cooled Smart Cooling
Product
User Manual (300 mm Width) 3 Installation Guide
Issue 15 (2020-12-10) Copyright © Huawei Technologies Co., Ltd. 29