IMBA-8650 Motherboard
Page 123
IDE Channel 0 Master
IDE Channel 0 Slave
IDE Channel 1 Master
IDE Channel 1 Slave
IDE Channel 2 Master
IDE Channel 3 Master
IDE device configurations are changed or set in the IDE Configuration menu (
BIOS Menu
3). If an IDE device is detected, and one of the above listed BIOS configuration options is
selected, the IDE configuration options shown in Section
0 appear.
Drive A/B [1.44M, 3.5 in.]
Use the Drive A/B configuration to specify the floppy drive type installed in the system.
The floppy drive configuration options are:
None (Default for Drive B)
360K, 5.25 in.
1.2M, 5.25 in.
720K, 3.5 in.
1.44M, 3.5in (Default for Drive A)
2.88M, 3.5 in.
Video [EGA/VGA]
Use the Video option to specify what type of monitor is attached to the VGA port.
EGA/VGA
(Default) The screen is an EGA/VGA monitor
CGA 40
The screen is a CGA 40 monitor
CGA 80
The screen is a CGA 80 monitor
MONO
The screen is a monochrome monitor
To Next Page
Loading...
Need help?
General
