IMBA-8650 Motherboard
Page 129
Boot Device
Use the Boot Device options to select the order of the devices the system boots from.
There are three boot device configuration options:
First Boot Device [Default: Floppy]
Second Boot Device [Default: HDD-0]
Third Boot Device [Default: LS-120]
Using the default values, the system first looks for a FDD to boot from. If it cannot find an
FDD, it boots from a HDD. If both the FDD and the HDD are unavailable, the system boots
from a LS-120 drive.
Boot Device configuration options are:
Floppy
LS120
HDD-0
SCSI
CDROM
HDD-1
HDD-2
HDD-3
ZIP100
USB-FDD
USB-ZIP
USB-CDROM
USB-HDD
LAN
Disabled
Boot Other Device [Enabled]
Use the Boot Other Device option to determine whether the system uses a second or
third boot device if the first boot device is not found.
To Next Page
Loading...
Need help?
General
