IMBA-8650 Motherboard
Page 149
EPP1.7
(Default) EPP1.7 mode is enabled
EPP1.9
EPP1.9 mode is enabled
ECP Mode Use DMA [3]
Use the ECP Mode USE DMA option to select which DMA to use. The following DMA
options are available:
3
(Default) DMA 3 is selected
1
DMA 1 is selected
PWRON After PWR-Fail [Off]
Use the PWRON After PWR-Fail option to select which what state the computer will
return to after a power cut. The following DMA options are available:
Off
(Default) The system remains off, even when power is restored
On
The system turns on after power is restored
Former-Sts
The system returns to the state it was before power
was cut. If the system was off when power was cut, it
remains off. If the system was on when the power was
cut, the system turns on when power is restored.
To Next Page
Loading...
Need help?
General
