IMBA-8650 Motherboard
Page 125
6.2.1 IDE Primary Master/Slave
Use the IDE Primary Master/Slave menu (BIOS Menu 3) to set or change the
master/slave IDE configurations.
BIOS Menu 3: IDE Channel Master
IDE HDD Auto-Detection [Press Enter]
Use the IDE HDD Auto-Detection option to enable BIOS to automatically detect the IDE
settings. Select IDE HDD Auto-Detection and press E
NTER. BIOS automatically detects
the HDD type. Do not set this option manually.
IDE Channel 0 Master [Auto]
Use the IDE Primary Master option to activate or deactivate the following drive channels:
Channel 0 Master
Channel 0 Slave
Channel 1 Master
To Next Page
Loading...
Need help?
General
