IMBA-8650 Motherboard
Page 130
Disabled
The system does not look for second and third boot
devices if the first one is not found.
Enabled
(Default) The system looks for second and third boot devices if the
first one is not found.
Boot Up Floppy Seek [Enabled]
The Boot Up Floppy Seek option enables testing of the floppy drives to determine if they
have 40 or 80 tracks.
Disabled
Floppy drives are not tested
Enabled DEFAULT
Floppy drives are tested
Boot Up Numlock Status [On]
Use the Boot Up Numlock Status option to specify the default state of the numeric
keypad.
Off
The keys on the keypad are not activated.
On
(Default) Activates the keys on the keypad.
Gate A20 Option [Fast]
The Gate A20 Option BIOS option is a legacy option for choosing how Gate A20 is
controlled.
Fast DEFAULT
The chipset controls Gate A20
Normal
A pin in the keyboard controller controls Gate A20
Typematic Rate Setting [Disabled]
The Typematic Rate Setting adjusts the repeat rate and repeat delay of the keyboard
when a key is pressed.