IMBA-8650 Motherboard
Page 141
On-Chip Primary/Secondary IDE [Enabled]
The On-Chip Primary/Secondary IDE option enables or disables the IDE controller on
the system chipset.
Enabled
(Default) The IDE channel is enabled
Disabled
The IDE channel is disabled
IDE Primary/Secondary Master/Slave PIO [Auto]
The IDE Primary/Secondary Master/Slave PIO option configures which Programmed I/O
mode to use if Programmed I/O is in use.
Auto
(Default) The fastest PIO speed is automatically chosen
Mode 0
Maximum transfer speed of 3.3MB/s
Mode 1
Maximum transfer speed of 5.2MB/s
Mode 2
Maximum transfer speed of 8.3MB/s
Mode 3
Maximum transfer speed of 11.1MB/s
Mode 4
Maximum transfer speed of 16.7MB/s
SATA Mode [IDE]
The SATA Mode option selects the mode of the onboard SATA. This setting cannot be
changed.
IDE
(Default) The operating system does not load SATA ACHI
functions and uses the native IDE driver.
On-Chip Serial ATA [Auto]
The On-Chip Serial ATA option configures the serial ATA settings for the onboard SATA
controller.
To Next Page
Loading...
Need help?
General
