ifm Vision Assistant O3M
128
With the "Collision avoidance settings", the collision avoidance
can be set. The reliability of the collision avoidance increases if the
settings correspond with the properties of the vehicle.
The "Sensitivity of crash prediction" indicates how sensitive the
reactions of the collision avoidance are supposed to be.
● [low]: minimum detection.
● [medium]: medium detection.
● [high]: maximum detection.
The sensitivity depends on the application. The sensitivity
[medium] is recommended for most applications.
With "inactive time after predicted crash", you can set a waiting
time which begins after a recognised collision. Within the set time,
no collisions are recognised. Further collisions are only recognised
after the time is elapsed.
To Next Page
