Need help?Do you have a question about the Intel 740 and is the answer not in the manual?
General| GPU | Intel 740 |
|---|---|
| GPU Codename | Auburn |
| Release Date | February 12, 1998 |
| Memory Type | SDRAM |
| Memory Bus Width | 64-bit |
| DirectX | 5.0 |
| OpenGL | 1.1 |
| Ports | VGA |
| Manufacturing Process | 350 nm |
| Memory Size | 8 MB |
| Bus Interface | PCI |
| API Support | Direct3D |
Outlines the purpose, organization, and scope of this design guide.
Lists documents and resources relevant to designing with the Intel740 graphics accelerator.
Describes the features of the Intel740 graphics accelerator for ATX and NLX add-in cards.
Details the key interfaces and capabilities of the Intel740 graphics accelerator.
Describes the Bt829B video capture processor and its capabilities.
Details the Bt869 component for high-quality TV output.
Defines key terms and concepts used in the design guide.
Provides recommendations for robust board layout and signal routing.
Presents detailed schematics for the Intel740 graphics accelerator add-in card reference design.
Introduces design guidelines for developing a 3-device AGP motherboard.
Offers detailed guidelines for AGP bus and local memory subsystem layout and routing.
Provides the schematics for the 3-point AGP reference motherboard design.
Lists design considerations for different Intel740 graphics accelerator usage scenarios.
Explains how to manage airflow for optimal cooling of system components.
Discusses methods to improve thermal performance, such as heat sinks.
Covers factors affecting heat transfer from the component to the heat sink.
Specifies board dimensions and general requirements for AGP 1.0.
Details mounting hole specifications for attaching fansinks to the board.
Provides guidance on the placement of VMI headers for daughter card connections.
Illustrates the pinout and connections for the 50-pin video connector.
Shows recommended bracket placement and cutout dimensions.
Discusses specific mechanical considerations for NLX chassis compatibility.
Lists vendors and contact information for voltage regulator components.
Provides vendor and part number information for 50-pin connectors.
Lists vendors and contact information for fan and heatsink solutions.
Identifies Intel part numbers for flash memory components.
Lists vendors and contact information for video encoder/decoder ICs.
Lists vendors and contact information for DVD daughter card solutions.
Lists vendors and contact information for TV tuner solutions.
Comprehensive guide on thermal design for Intel740 graphics accelerators.
Details BIOS modifications for 3-device AGP low power logic.
Defines the specification for PC SGRAM devices, covering features and parameters.
Provides specifications for unbuffered SDRAM/SGRAM SO-DIMM modules.
To Next Page