Intel740™ Graphics Accelerator Design Guide
5-5
Mechanical Information
5.6 NLX Considerations
The NLX card has a special bracket design and card cutout to accommodate the NLX chassis. The
NLX card can be used in an ATX chassis, but needs to use an ATX bracket. Unless a dual sided
board is used, the full featured reference design will not be feasible on the NLX add-in card. This is
due to the decreased physical size of the NLX add-in card. The 50 pin video connector will not fit
in the NLX chassis. Each board designer must determine the placement of their desired features on
the NLX card.
To Next Page
Loading...