Intermec CK30

Using the Terminal Emulation MenusChapter —4
118 TE 2000
 5250 Terminal Emulation Programmer’s Guide
Scan Options to Enable Bar Codes
There are menus of options to enable (or disable) various bar code symbol-
ogies. To enable a bar code, press the numeric key corresponding to the
number of the bar code symbology (shown on menu), then press [Enter].
After enabling a particular bar code, options may have to be selected for
the bar code. After selecting the desired options, set the length require-
ments (such as minimum and maximum length, fixed lengths, leading and
trailing character options, etc.).
Once the length requirements are set, the terminal returns to the same
Scan Options menu. Choose another bar code symbology from that menu
or press [Enter] to advance to the next Scan Options menu.
Scan Options
1) UPC
2) EAN
3) Code 39
4) Code 128
5) Codabar
UPC
1) Enabled
2) Add-On 2
3) Add-On 5
4) Sys 1 UPCE
5) Sys 0 UPCE
6) Expand E To A
Code 39
1) Enabled
2) Chk Digit
3) Extended
4) Encoded
5) Auto-Encoded
6) Relax Std
7) Full ASCII
Codabar
1) Codabar
2) ABC Codabar
EAN
1) Enabled
2) Add-On 2
3) Add-On 5
4) Expand 8 To 13
Code 128
1) Enabled
2) UCC/EAN
3) No UCC Type
4) UCC F1 Value
[1] [2]
[3] [4]
[5]
4) Sys 1 UPCE is for
6400, 17XX, 11XX,
700 Series, CK30,
CK31, CV60
6) Relax Std is for
59XX, 17XX, 11XX
RELAX CODE 39
1) Quiet zone
2) Data Decode
3) Element Decode
4) START Decode
[6]
2) ABC Codabar
is for 59XX, 17XX,
11XX
3) Extended is blank
for 700 Series, CK30,
CK31, CV60
2) Add -On 2 and
3) Add -On 5
if using 700 Series,
CK30, CK31, or
CV60, see the follow-
ing note.
Note: For the 700 Series, CK30, CK31, or CV60 Terminal, this imple-
mentation of the TE 2000 application processes EAN 8 and UPC E bar
codes in the same manner. The type character for EAN 8 with Add-On 2
or Add-On 5 will decode as UPC E with Add-On 2 or Add-On 5, respec-
tively. The bar code type character will also indicate UPC E with Add-On
2 or Add-On 5, respectively. Consequently, the drop leading and trailing
UPC options will be u sed when an EAN 8 with Add-On 2 or Add-O n 5 is
decoded.