Using the Terminal Emulation MenusChapter —4
126 TE 2000
5250 Terminal Emulation Programmer’s Guide
2) Auto Tab Scan
Causes the cursor to tab forward to the next input field when a good scan
is obtained.
Note: 2) Auto Tab Scan cannotbeenabledatthesametimeas3) Auto
Entr Scan.
3) Auto Entr Scan
Actuates the <Enter> function when a good scan is obtained. Note that this
cannotbeenabledatthesametimeasAuto Tab Scan.
Note: 3) Auto Entr Scan cannotbeenabledatthesametimeas2) Auto
Tab Scan.
4) Emulate 3210 (6400, 5055, 59XX, 17XX, 11XX)
The Intermec 3210 emulation option allows the 3270 keyboard to emulate
an RT3210 Hand-Held Computer, performing the same functions. For
full 3210 compatibility, disable b uff ering the keyboard, set cursor to lazy
mode, and set the LCD Parms to Key Uppercase.
5) Telnet (blank for 5020, 700 Series, CK30, CK31, CV60)
Handles telnet option negotiations to establish a session with an appropri-
ate telnet server.
Note: 5) Telnet cannot be changed if you are using TCP/IP.
6) Origin Set
When enabled, resets the screen origin when an exclamation mark is f ound
in the data stream.
7) More
Select 7) More for additional features.
S 1) Device Name
Enters a physical name for a device. This is 1–10 ch aracters with allow-
able values of A–Z, a–z, 0–9, the pound symbol (#), the dollar sign ($),
the ampersand (@), and an underscore ( _ ). 3270E RFC 2355 S upport.
Note: The first character of 1) Device Name cannot start with a num-
ber (0–9).
S 2) Allow NAWS (Negotiate About Window Size)
When enabled, the terminal will support Telnet option 31 if prompted.
When disabled, this option will return a “won’t do” message.
S 3) BRT Auto Enter
When enabled, if the last field on a screen has the reverse video attribute
set, then when that field is exactly filled, the terminal will automatically
send the data for this screen back to the host with an “Enter AID” code.
If disabled, the screen will wait for the user to hit the AID key prior to
sending data back to the host. Default is d isabled.
To Next Page
Loading...
