Intermec CK30 - Page 248

Customizing Your ConfigurationChapter —5
224 TE 2000
 5250 Terminal Emulation Programmer’s Guide
Generic Bar Code Options (continued)
Terminals using this
option
Values
[Session 1]
Session 2
Session 3 (700 Series, CK30, CK31, CV60)
Session 4 (700 Series, CK30, CK31, CV60)
Options
Minimum Length upc|min_length
ean|min_length
code_128|min_length
code_39|min_length
codabar|min_length
abc_codabar|min_length
str_2of5|min_length
int_2of5|min_length
ci_2of5|min_length
code_11|min_length
code_93|min_length
plessey|min_length
Numeric, mi nimum =
0, maximum = 99 [0]
700 Series, CK30,
CK31, CV60
UPC Options
Note that brackets indicate default settings and values.
UPC Options
Options
[Session 1]
Session 2
Session 3 (700 Series, CK30, CK31, CV60)
Session 4 (700 Series, CK30, CK31, CV60)
Values
Terminals using this
option
Add-On 2 upc|add-on_2 Enabled, [Disabled] 700 Series, CK30,
CK31, CV60
Add-On 5 upc|add-on_5 Enabled, [Disabled] 700 Serie s, CK30,
CK31, CV60
Expand E to A upc|expand_e_to_a Enabled, [Disabled] 700 Series, CK30,
CK31, CV60
System 0 UPCE upc|sys_0_upce Enabled, [Disabled] 700 Se ries, CK30,
CK31, CV60
System 1 UPCE upc|sys_1_upce Enabled, [Disabled] 700 Se ries, CK30,
CK31, CV60