Intermec CK30 - Page 249

Customizing Your Configuration—Chapter 5
225TE 2000
 5250 Terminal Emulation Programmer’s Guide
EAN Options
Note that brackets indicate default settings and values.
EAN Options
Options
[Session 1]
Session 2
Session 3 (700 Series, CK30, CK31, CV60)
Session 4 (700 Series, CK30, CK31, CV60)
Values
Terminals using this
option
Add-On 2 ean|add-on_2 Enabled, [Dis abled] 700 Se ries, CK30,
CK31, CV60
Add-On 5 ean|add-on_5 Enabled, [Disabled] 700 Series, CK30,
CK31, CV60
Expand 8 to 13 ean|expand_8to13 Enabled, [Disabled] 700 Se ries, CK30,
CK31, CV60
Code 39 Option s
Note that brackets indicate default settings and values.
Code 39 Options
Options
[Session 1]
Session 2
Session 3 (700 Series, CK30, CK31, CV60)
Session 4 (700 Series, CK30, CK31, CV60)
Values
Terminals using this
option
Auto-Encoded code_39|auto-encoded E nabled, [Disabled] 700 Series, CK30,
CK31, CV60
Check D igit code_39|chk_digi t Enabled, [Disabled] 700 Series, CK30,
CK31, CV60
Data Decode code_39|data_decode E nabled, [Disabled] 700 Series, CK30,
CK31, CV60
Element Decode code _39|element_decod Enabled, [Disabled] 700 Series, CK30,
CK31, CV60
Encoded code_39|encoded Enabled, [Disabled] 700 Series, CK30,
CK31, CV60
Extended code_39|extended Enabled, [Disabled] 700 S eries, CK30,
CK31, CV60
Full ASCII code_39|full_ascii E nabled, [Disabled] 700 Series, CK30,
CK31, CV60
Quiet Zone code_39|quiet_zone Enabled, [Disabled] 700 Series, CK30,
CK31, CV60
START Decode code_39|start_decode Enabled, [Disabled] 700 S eries, CK30,
CK31, CV60