Invacare LiNX - Restoring Default Wheelchair Configurations; Loading Default Configurations

Invacare®LiNX
Thesystemsummarydisplayseachmodulewithits
rmwarestatus:
•Awhitearrowonabluebackgroundindicatesthe
rmwareisout-of-dateandanupgradeisavailable.
Firmwarecanbeupgradedonmodulesindividuallyorall
atonce.
Toupgradeindividually:
1.SelectsinglemoduleandclickUpdatebutton.
Toupgradeallatonce:
1.ClickUpdateAll.
9.5.7RestoringDefaultWheelchair
Congurations
Fig.9-3
LoadingstoredWheelchairCongurations
1.ClickManagetoopenwheelchaircongurationlist.
2.
Fig.9-4
ClickoniconAbehinddesiredwheelchair
conguration.
3.
Fig.9-5
Amessageisdisplayedwarningyou,thatcurrent
congurationwillbeoverwritten.
ClickOverwrite(A)tonishoperation.Otherwise,
clickCancel(B)toabortoperation.
LoadingDefaultWheelchairConguration
Toresettheconnectedwheelchaircongurationtothe
selecteddefaultwheelchairconguration:
1.ClickonResettoDefaultbuttononthetoolbar.
2.
Fig.9-6
Amessageisdisplayedwarningyou,thatcurrent
congurationwillbeoverwritten.
ClickOverwrite(A)tonishoperation.Otherwise,
clickCancel(B)toabortoperation.
Defaultchaircongurationmeanslastconnected
conguration.
Ifchaircongurationsarenotsupportedby
wheelchair,suchasinLiNXLEsystems,Resetto
DefaultandManagearenotdisplayed.
9.5.8LoadingDefaultCongurations
1.OpenLiNXAccesstool.
2.
Fig.9-7
ClickeitheronbuttonResetToDefault(A)orManage
(B)intoolbar.
1181605129-G