Invacare LiNX - Writing a Program to the Wheelchair; Saving Programs

Invacare®LiNX
LiveEditMode
Wheninliveeditmode,changestoparameterswill
takeimmediateeffect,changingtheperformance
ofthewheelchairimmediately.
Thereisnofunctiontoundoachangeinlive
editmode,somakesure,yousaveacopyofthe
existingprogramsothatyoucanrestoresettings
ifyouneedto.
Fig.7-6
Certainparameterscanbeupdatedinliveeditmode.
Theseareidentiedbyacirculariconinfrontofthe
parametername.
Liveeditmodeallowscertainparameterstobewrittento
thecontrollerimmediately.Thisisusefulforspeedingup
theprocessofsettinguportestingvariousapplications
andscenarios.
BulkEditMode
Fig.7-7
Certainparameterscanonlybeeditedinbulkeditmode.
Theseareidentiedbyacoloredbackground.Toedit
theseparameters,bulkeditmodemustbeunlockedbefore
proceeding.
Inbulkeditmode,parametersarenotwrittentothe
controllerimmediately.Theyarewrittentothecontroller,
whenyouselectWritetoChair,referto7.3.6Writinga
programtothewheelchair,page80
.
Bydefault,liveeditmodeisenabledeverytimethe
systemispoweredup,includingafterapowercycle.The
applicationremainsinliveeditmodeuntilbulkeditmode
isunlocked.Atthispointtheapplicationchangestobulk
editmodewhileliveeditmodeisdisabled.Theapplication
remainsinbulkeditmodeuntilthesystemispower-cycled.
7.3.6Writingaprogramtothewheelchair
Thisfeatureisonlyavailablewhenawheelchairis
connected.
1.ClickonApplicationmenubutton.
2.SelectWritetoChair.
Afterwritingtothewheelchair,theLiNXAccesstoolcycles
thesystem’spowerandautomaticallyreconnectstothe
system.
TheApplicationmenudialogueinthispicture
showsallavailableoptions,whenyouarein
Connectioncontext.InFilecontexttheselectionis
morelimited.
7.3.7Savingprograms
WheelchairswithSerialNumbersbefore
18JE000303:IfyouareaddingOUT500orreplacing
aREM400AwithaREM400B,contactInvacare
TechnicalServicetohavetheexistinglessaved
andthebundlelesupdated.
UsingSave
1.ClickonApplicationmenubutton.
2.SelectSave.
801605129-G