Invacare LiNX - Configuring Mouse Clicks; Configuring Toggle Switches

ModifyingwheelchaircongurationwithPCtool
FormoreinformationabouttheotherparameterssuchasInputPortDebounce,referto10.11ConguringControl
Input/Output(ControlIO),page133 .
10.11.3ConguringMouseClicks
Inthisexampleabuddybuttonisconguredtoperformadoubleleft-clickmouseoperation.Thebuddybuttonis
connectedtotheleftjacksocketontheREM400.
1.OpenModules→REM4xx.
2.ScrolldowntoInputTypeofLeftJackSocket(J1)Tip.
Fig.10-53
3.ChooseInputType.
Optionsare:
•NotConnected
•Button
•PowerButton
4.ClickonButtontorevealcontrolIOslots.
5.ChooseMomentaryslot.
6.Setdisplayeddrop-downmenustoConnectivity→
MouseLeftClick→Double.
FormoreinformationabouttheotherparameterssuchasInputPortDebounce,referto10.11ConguringControl
Input/Output(ControlIO),page133 .
10.11.4ConguringToggleSwitches
LeftToggleForwardandRightTogglearesetwithadefaultconguration,thatcanbechanged.
Inthisexample,thelefttogglebuttonontheREM400isconguredtocontroloutputpin3ontheoutputmodule
(OUT500).Forthedurationthatthelefttogglebuttonispushedforward,pin3ontheoutputmodulewillbeactive.
1.OpenModules→REM4xx.
2.ScrolldowntoInputTypeofLeftToggleBack.
Fig.10-54
3.ChooseInputType.
Optionsare:
•NotConnected
•Button
•PowerButton
1605129-G137