IPCGansow CT 230 BT 85 - Page 26

PLDC01938
REVISION 00
01/06/2011
TECHNICAL DEPT.
Stavale
- date 05/09/2011 15/195
15 Disconnect the power to the brush motor or motors by means of the Anderson connectors G and remove the
terminals G1 from the connectors G.
16 Remove the sheath H from the motor power wires.
17 Gently lift up the air conveyor D1 running the motor power wires D3 through the cable glands D4 on the air
conveyor D1.
G
G
G1
PHOTO 35
G
H
D1
D1
D
D
D3
D3
D4
PHOTO 36