ITech IT6400 Series - Scope:current:triger

Scope commands
Copyright © Itech Electronic Co., Ltd. 96
RST Value
0
Example
SCOP:VOLT:TRIG 5
Query syntax
SCOPe:VOLTage:TRIGer?
Returns
<NRF>
SCOPe:CURRent:TRIGer
This command sets the current trigger level of oscilloscope function.
Model
The setting range of current trigger level
IT6411
-5.05A ~ +5.05A
IT6411S
-0.1A ~ +0.1A
IT6431
-10.05A ~ +10.05A
IT6432
-5.05A ~ +5.05A
IT6433
-2.55A ~ +2.55A
IT6432S
-21mA ~ +21mA
Command syntax
SCOPe:CURRent:TRIGer < NRF >
Arguments
< NRF >
RST Value
0
Example
SCOP:CURR:TRIG 5
Query syntax
SCOPe:CURR:TRIGer?
Returns
<NRF>