ITech IT6400 Series - Battery:total <Nrf; Battery:paramneter <Nrf><Nrf><Nrf; Battery:voltage:shut <Nrf

Battery commands
Copyright © Itech Electronic Co., Ltd. 102
BATTery:TOTal <NRf>
This command sets the total point of the current group of BATTERY.
Command syntax
BATTery:TOTal< NRf >
Arguments
0-19
Example
BATTery:TOTal 1
Query syntax
BATTery:TOTal?
Returns
<NR1>
BATTery:PARamneter <NRf><NRf><NRf>
This command sets the 3 parameters of the current point of the current group,
i.e., capacity, voltage and internal resistance.
Command syntax
BATTery:PARameter< NRf >
Arguments
Capacity,Volt,Res
Example
BATTery:PARameter 100,5,0.01
Query syntax
BATTery:PARameter?
Returns
<NRf>,<NRf>,<NRf>
BATTery:VOLTage:SHUT <NRf>
This command sets the voltage shut-off value of BATTERY.