ITech IT6400 Series - Scope:DVM:triger; Scope:triger:source

Scope commands
Copyright © Itech Electronic Co., Ltd. 97
SCOPe:DVM:TRIGer
This command sets the digital voltmeter trigger level of oscilloscope function.
Model
The setting range of DVM trigger level
IT6411
-20V~ +20V
IT6411S
-20V~ +20V
IT6431
-20V~ +20V
IT6432
-30V~ +30V
IT6433
-30V~ +60V
IT6432S
-30V~ +30V
Command syntax
SCOPe:DVM:TRIGer < NRF >
Arguments
< NRF >
RST Value
0
Example
SCOP:DVM:TRIG 5
Query syntax
SCOPe:DVM:TRIGer?
Returns
<NRF>
SCOPe:TRIGer:SOURce
This command sets the trigger source type of oscilloscope function.
Command syntax
SCOPe:TRIGer:SOURce
Arguments
VOLTage|CURRent|DVM