ITech IT6400 Series - System:communicate:gpib:address; System:communicate:lan:ip

System commands
Copyright © Itech Electronic Co., Ltd. 31
Arguments
None
Example
SYST:COMM:PROT?
Related Command
<CRD>
SYSTem:COMMunicate:GPIB:ADDRess
This command sets the GPIB communication address of the system.
Command syntax
SYSTem:COMMunicate:GPIB:ADDRess<NR1>
Arguments
<NR1>
Example
SYST:COMM:GPIB:ADDR 1
Query syntax
SYSTem:COMMunicate:GPIB:ADDRess?
Returns
<NR1> 1-30
SYSTem:COMMunicate:LAN:IP
This command sets the static IP address of system network.
Command syntax
SYSTem:COMMunicate:LAN:IP<SRD>
Arguments
<SRD>
Example
SYST:COMM:LAN:IP "192.168.1.10"