ITech IT6400 Series - List:triger; List:step; List:save; List:triger:enable

List commands
Copyright © Itech Electronic Co., Ltd. 114
Returns
0,1
LIST:TRIGer
This command sets the setting of LIST trigger and has no channel difference.
Command syntax
LIST:TRIGer
Arguments
NONE
LIST:STEP?
This command queries the step and group in which LIST operates.
Command syntax
LIST:STEP?
Arguments
NONE
Returns
<NR1>,<NR1> (First parameter is the group number, and the second
parameter is step number)
LIST:SAVE
This command saves the setting of current LIST group.
Command syntax
LIST:SAVE
Arguments
NONE
LIST:TRIGer:ENABle
This command sets to enable the LIST channel trigger.