ITech IT6400 Series - Status:questionable:ptransition

Status commands
Copyright © Itech Electronic Co., Ltd. 21
Arguments
0 to 65535
Default Value
0
Example
STAT:QUES:ENAB 32
Query syntax
STATus:QUEStionable:ENABle?
Returns
<NR1> (register value)
Related Command
STAT:QUES?
STATus:QUEStionable:PTRansition
This command sets or reads the positive value of the questionable condition
register. When the bit value of the questionable condition register changes from
0 to 1, and the corresponding bit of ptransition regiser is 1, then the
corresponding bit value of questionable event register turns into 1.
Command syntax
STATus:QUEStionable:PTRansition <NR1>
Arguments
0 to 65535
Default Value
0
Example
STAT:QUES:PTRansition 32
Query syntax
STATus:QUEStionable:PTRansition?
Returns
<NR1> (register value)