ITech IT6400 Series Programming Guide

Measurement Commands
Copyright © Itech Electronic Co., Ltd. 47
Command syntax
MEASure[:SCALar]:VOLTage:MINimum?
FETCh[:SCALar]:VOLTage:MINimum?
Arguments
None
Example
MEAS:VOLT:MIN?
FETC:VOLT:MIN?
Returns
<NR3>
Related Command
MEAS:CURR:MAX?
MEASure[:SCALar]:POWer[:DC]?
FETCh[:SCALar]:POWer[:DC]?
This command reads back power value.
Command syntax
MEASure[:SCALar]:POWer [:DC]?
FETCh[:SCALar]:POWer [:DC]?
Arguments
None
Example
MEAS:POW?
Returns
<NR3>
Unit
W (watt)
Related Command
MEAS: CURR? DC

ITech IT6400 Series Specifications

General

Brand	ITech
Model	IT6400 Series
Category	Power Supply
Language	English