IEEE-488 Commands
Copyright © Itech Electronic Co., Ltd. 18
indicates that the power supply has one or more reasons for requesting service.
Command syntax
*STB?
Arguments
None
Returns
<NR1> (register value)
Related Command
*SRE *ESR *ESE
*TRG
This command generates a trigger to any system that has BUS selected as its
source (for example, TRIG:SOUR BUS). The command has the same affect as
the Group Execute Trigger (<GET>) command.
Command syntax
*TRG
Arguments
None
Related Command
ABOR INIT TRIG:IMM
*TST?
This query causes the power supply to do a self-test and report any errors.
Command syntax
*TST?
Arguments
None
Returns
<NR1>
0 indicates the power supply passes its self test. Non-zero indicates an error
To Next Page
Loading...
