ITech IT6400 Series - Scope:triger:mode; Scope:triger:slope

Scope commands
Copyright © Itech Electronic Co., Ltd. 98
RST Value
VOLTage
Example
SCOPe:TRIGer:SOURce VOLTage
Query syntax
SCOPe:TRIGer:SOURce?
Returns
VOLTage|CURRent|DVM
SCOPe:TRIGer:MODE
This command sets the trigger mode of oscilloscope function.
Command syntax
SCOPe:TRIGer:MODE
Arguments
AUTO|NORM|SINGle
RST Value
AUTO
Example
SCOPe:TRIGer:MODE SINGle
Query syntax
SCOPe:TRIGer:MODE?
Returns
AUTO|NORM|SINGle
SCOPe:TRIGer:SLOPe
This command sets the trigger edge of oscilloscope function.
Command syntax
SCOPe:TRIGer:SLOPe