ITech IT6400 Series Programming Guide

Output command
Copyright © Itech Electronic Co., Ltd. 69
IT6411
0~ 15V
IT6411S
0 ~ 15V
IT6431
0 ~ 15V
IT6432
0 ~ 30V
IT6433
0 ~ 60V
IT6432S
0 ~ 30V
Command syntax
VOLTage:PROTection < NRf >
Arguments
< NRf >
Unit
V(Volts)
Example
VOLT:PROT 1.688
Query syntax
VOLTage :PROTection?
Returns
< NRf >
[SOURce:]VOLTage:PROTection:STATe
This command sets the source OVP state. Parameters include 1, 0, ON and
OFF. When current exceeds the OVP value, the power supply will be switched
off.
Command syntax
[SOURce:]VOLTage:PROTection:STATe <bool>
Arguments
0|1|ON|OFF
RST Value
OFF

ITech IT6400 Series Specifications

General

Brand	ITech
Model	IT6400 Series
Category	Power Supply
Language	English