ITech IT6400 Series - Chapter9 Trace Commands; Trace:clear; Trace:data; Trace:points:actual

Trace Commands
Copyright © Itech Electronic Co., Ltd. 85
Chapter9 Trace Commands
TRACe Subsystem
Data trace subcommand system, which sets the data cache size, storage mode,
storage variable type, data cache filter, data sampling rate, sampling depth, etc.
TRACe:CLEar
This command sets data cache clearing.
Command syntax
TRACe:CLEar
Arguments
None
Example
TRACe:CLEar
TRACe:DATA?
This command queries all data in the data cache. Data type is set by
TRACe:STATistics.
Command syntax
TRACe:DATA?
Arguments
None
Example
TRACe:DATA?
Returns
<NRf >
TRACe:POINts:ACTual?
This command queries the count of effective data in data cache.