ITech IT6400 Series Programming Guide

Measurement Commands
Copyright © Itech Electronic Co., Ltd. 49
Arguments
AUTo|HIGH
Example
SENS:CURR:MODE AUTo
Query syntax
SENSe:CURRent[:DC]:MODE[:UPPer]?
Returns
<CRD>
SENSe:FUNCtion
This command configures the sensing function for triggered measurements.
The dc source has up to three measurement sensors as described below. The
query returns the function setting.
CURRent Senses the current measurement at the instrument outputs.
DVM Senses the voltage measurement at the DVM inputs.
VOLTage Senses the voltage measurement at instrument the outputs.
Command syntax
SENSe:FUNCtion <function>
Arguments
"VOLTage" | "CURRent" | "DVM"
Example
SENS:FUNC "VOLT"
Query syntax
SENSe:FUNCtion?
Returns
<SRD>
SENSe:SWEep:POINts
This command defines the number of points in a measurement.
Command syntax
SENSe:SWEep:POINts<NRf+>

ITech IT6400 Series Specifications

General

Brand	ITech
Model	IT6400 Series
Category	Power Supply
Language	English