ITech IT6400 Series - [Source:]Resistance[:Level][:Immediate][:Amplitude]; [Source:]Resistance:trigger

Output command
Copyright © Itech Electronic Co., Ltd. 67
IT6432S
0-20
Command syntax
[SOURce:]RESistance[:LEVel][:IMMediate][:AMPLitude] <NRf >
Arguments
<NRf >
Unit
Ω(Ohms)
Example
RES 1
Query syntax
[SOURce:]RESistance[:LEVel][:IMMediate][:AMPLitude]?
Returns
< NR3>
[SOURce:]RESistance:TRIGger
This command sets the source internal resistance output value in case of
trigger.
Command syntax
[SOURce:]RESistance[:LEVel]:TRIGgered[:AMPLitude] <NRf+>
RST Value
0
Example
RES:TRIG 1
Query syntax
[SOURce:]RESistance[:LEVel]:TRIGgered[:AMPLitude]?
Returns
<NR3>