System commands
Copyright © Itech Electronic Co., Ltd. 33
Returns
<SRD>
Related Command
SYSTem:COMMunicate:LAN:SOCKetport
This command sets the socket value of the system network.
Command syntax
SYSTem:COMMunicate:LAN:SOCKetport <NR1>
Arguments
<NR1>
Example
SYST:COMM:LAN:SOCK 3000
Query syntax
SYSTem:COMMunicate:LAN:SOCKetport?
Returns
<NR1>
SYSTem:SAVe
This command saves the system parameters. If this instruction is not added,
system parameters will not be saved after the power is OFF.
Command syntax
SYSTem:SAVE
Arguments
None
Example
SYST:SAVE
CALibrate:INITialize
This command is used to initialize the calibration parameters.
To Next Page
Loading...
Need help?
General
