ITech IT6400 Series Programming Guide

Output command
Copyright © Itech Electronic Co., Ltd. 57
Example
OUTP:DFI 1 OUTP:DFI ON
Query syntax
OUTPut:DFI[:STATe]?
Returns
0 | 1
Related Command
OUTP:DFI:SOUR
OUTPut:DFI:SOURce
This command selects the source for discrete fault indicator (DFI) events. The
choices are:
QUEStionable selects the Questionable event summary bit (bit 3 of the Status
Byte Register)
OPERation selects the Operation Event summary bit (bit 7 of the Status Byte
Register)
ESB selects the Standard Event summary bit (bit 5 of the Status Byte Register)
RQS selects the Request Service bit (bit 6 of the Status Byte Register)
OFF selects no DFI source
Command syntax
OUTP:DFI:SOUR <source>
Arguments
QUES | OPER | ESB | RQS | OFF
RST Value
OFF
Example
OUTP:DFI:SOUR OPER
Query syntax
OUTPut:DFI:SOUR?
Returns
<CRD>

ITech IT6400 Series Specifications

General

Brand	ITech
Model	IT6400 Series
Category	Power Supply
Language	English