ITech IT6400 Series Programming Guide

Battery commands
Copyright © Itech Electronic Co., Ltd. 107
Arguments
NONE
Example
BATT:CLEar
BATTery:RECall:SELect <NR1>
This command sets the group of BATTERY to be recalled and load it.
Command syntax
BATTery:RECall:SELect <NR1>
Arguments
0-19
Example
BATT:REC:SEL 1
BATTery:MODE
This command sets the operation mode of BATTERY.
Command syntax
BATTery:MODE
Arguments
CHARge,DISCharge,SIMulator
Example
BATT:MODE CHARge
Query syntax
BATTery:MODE?
Returns
CHARge,DISCharge,SIMulator
BATTery:VOLTage <NRf>
This command sets the charge or discharge voltage value of the BATTERY.
Model
The setting range of Charge or discharge voltage value

ITech IT6400 Series Specifications

General

Brand	ITech
Model	IT6400 Series
Category	Power Supply
Language	English